Добре дошли в онлайн магазина на фирма "Сат Бокс" ЕООД
Официален представител на Ferguson
Количка: ( 0 )

EMP Centauri DiSEqC switch S2/1PCN-W1

EMP Centauri DiSEqC switch S2/1PCN-W1
  • Подарък:
  • Дисек ключове
  • EMP Centauri
13.00 лв.
не е наличен
Инфо:

2in/1out DiSEqC 1.0 & 1.1 & 1.2 switch for 1 subscriber. The switch can operate in any DiSEqC mode, proper selection is made automatically according to commands sent by receiver.
Its usage scope includes switching between single LNBs (using command "Position"), switching between Monoblock and other LNB or switching between two Monoblocks (using command "Uncommitted"). It can be used also as cascaded switch to existing standard DiSEqC switch.

Brief specification:

Parameter Condition Value
Frequency range LNB inputs 950-2300 MHz
Output 950-2300 MHz
Control DiSEqC 1.0 command "Position"
DiSEqC 1.1 command "Uncommitted"
DiSEqC 1.2 command "Goto nn"
Insertion loss   5 dB avg
Sat. inputs isolation   25 dB min
Power consumption From receiver 30 mA (18 V) + LNB
DC current pass 400 mA max
Dimensions (w,d,h)   8.2 x 7.7 x 2.3 cm
Temperature range   -30 ~ +70 °C